Electronic Universal Testing Machines

We are Authorized Dealers of FIE, Manufacturer, Supplier, Distributor, Trader, Exporter, Importer, Maintenance, AMC Services Provider of Electronic Universal Testing Machines, Universal Testing Machines, Digital HGFL 100 Ton Universal Testing Machines, Digital Universal Testing Machines, Automatic Electro Mechanical Universal Testing Machines, Spring Universal Testing Machines, Computerized Universal Testing Machines, Chain and Rope Testing Machines, Portable Type Universal Testing Machines and our setup is situated at Pune, Maharashtra, India.



Electronic Universal Testing Machines
Electronic Universal Testing Machines
Electronic Universal Testing Machines
Micro Controller Based Panel
Micro Controller Based Panel
Loading accuracy as high as +-
Loading accuracy as high as +-
Motor driven threaded columns for quick
Motor driven threaded columns for quick & effortless adjustment of lower cross-head to facilitate rapid fixing of test specimen


Model - UTE

UTE Operation of machine is by hydraulic transmission of load from the test specimen through pressure transducer to a separately housed load indicator. The system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the pressure transducer housed in the control panel. The transducer gives the signal to the electronic display unit, corresponding to the load exerted by the main ram.

Simultaneously the encoder fitted on the straining unit gives the mechanical displacement to the electronic display unit. Both the signals are processed by the microprocessor and load and displacement is displayed on the digital readouts simultaneously.


Electronic Control Panel Series Universal 2020 (UTE) :

Micro Controller based panel incorporating state of art technology with following features.

  • Front panel membrane type key board for machine operation.
  • LCD Display
  • Data entry with membrane key board of test parameters including rupture %, peak etc.
  • Panel communication with PC (RS 232 Protocol).

Features :
  • Loading accuracy as high as ±1./0
  • Straining at variable speeds to suit a wide range of materials.
  • Printer & PC graphs enabl. to study the behavior of the material.
  • Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen.
  • Simplicity in reading because of digital readouts.
  • Wide range of standard and special accessories, including load stabilizer
  • Easy change from plain to threaded and screwed specimens.
  • Large effective clearance between columns enables testing of standards specimens as well as structures.
  • Simple controls for ease of operation.
  • Robust stmining frame of an extremely rigid construction.
  • Safe operation ensured by means of safety devices.
  • Fully enclosed and protected pressure transducer.
  • USB port to transfer data to computer for analysis/storage evaluation etc.
  • Manual control & release valve operation.
  • Load Capacity: 100 kN, 200 kN, 400 kN, 600 kN, 1000 kN, 1200 kN, 1500 kN, and 2000 kN.

Application :

'FIE' Electronic Universal Testing Machine isdesigned for testing Ferrous & Non-Ferrous materials under tension, compression bending, transverse and shear loath. Hardness test on metals can also conducted.

Machine Consists of Straining Unit
  • This consists of a cylinder motor with chain and sprocket drive and a table coupled with the ram of the hydraulic cylinder, mounted on to a robust base.
  • The cylinder and the ram are individually lapped to eliminate friction. The upper cross-head is rigidly fixed to the table by two strengthened columns.
  • The lower cross-head is connected to two screwed columns which are driven by a motor. Axial loading of the ram is ensured by relieving the cylinder and ram of any possible side loading by the provision of ball seating.
  • A Rotary Encoder of minimum resolution 0.1mm is provided to measure the deformation of the specimen.
  • Tension test is conducted by gripping the test specimen between the upper and lower cross-heads.
  • Compression, transverse, bending, shear and hardness tests are conducted between the lower cross-head and the table.
  • The lower cross-head can be rised or lowered rapidly by operating the screwed columns, thus facilitating of fixing of the test specimen.

Control Panel :
The Control panel consists of a power pack complete with drive motor and an oil tank, conrol valves and electronic display unit

Power Pack :
The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuosly non-pulsating oil flow. Hence the load application is very smooth.

Hydraulic Controls :
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of the oil flow is infinitely variable. Incorporated in the hydraulic system is a regulating valve, which maintains a practically constant rate of piston movement. Control by this valve allows extensometer reading to be taken.

Optional Windows based software available for :
  • Online graph on PC, Data analysis, Statistics, Point tracing, superimposing graphs to compare with standard, zooming graph etc.
  • Report customization as per custom requirements.
  • Proof stress calculation from 0.1% to 1%.
  • Integration of custom sample.
  • Facility to export data/results to PDF, EXCEL & CSV formats.
  • Windows based OS support.

MODEL UNIT UTE 10 UTE 20 UTE 40 UTE 60 UTE 100 UTE 120 UTE 150 UTE 200
Maximum Capacity kN 100 200 400 600 1000 1200 1500 2000
Measuring range kN 0-100 0-200 0-400 0-600 0-1000

0 – 1200

0 – 1500 0-2000
Load resolution
(50000 counts full scale)
N 2 4 8 12 20 24 30 40
Load range with accuracy of Measurement +/-1% kN 2 to 100 4 to 200

8 to 400

12 to 600 20 to 1000

24-1200

30-1500 40-2000
Resolution of piston movement (Displacement) mm 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
Clearance for tensile test
(At fully descended working piston)
mm 50-700 50-700 50-700 50-800 50-850 50-850 50-850 50-850
Clearance for compression test (At fully descended working piston) mm 0-700 0-700 0-700 0-800 0-850 0-850 0-850 0-850
Clearance between columns mm 500 500 500 600 750 750 750 750
Ram Stroke mm 150 200 200 250 250 250 250 250
Straining/ Piston Speed (at no load) mm/min 0-300 0-150 0-150 0-100 0-80 0-65 0-50 0-45
                   
CONNECTED LOAD
Power HP 1.33 1.33 2.33 2.5 4 4 5 6
V   400-440 400-440

400-440

400-440 400-440

400-440

400-440 400-440
  3 3 3 3 3 3 3 3
STANDARD ACCESSORIES
FOR TENSION TEST                  
Clamping jaws for round specimens of diameter mm 10-20 10-20 10-25 10-25 10-25 10-25 10-25 10-25
20-30 20-30 25-40 25-40 25-45 25-45 25-45 25-45
Clamping jaws for flat specimens of thickness mm 0-10 0-10 0-15 0-15 0-22 0-20 0-20 0-20
10-20 10-20 15-30 15-30 22-44 20-40 20-40 20-40
Width mm 50 50 65 70 70 70 70 70
FOR COMPRESSION TEST
Pair of Compression Plates of Dia. mm 120 120 120 120 160 160 160 160
FOR TRANSVERSE TEST
Table with adjustable rollers                  
Width of rollers mm 160 160 160 160 160 160 200 200
Diameter of Rollers mm 30 30 30 50 50 50 50 50
Maximum clearance between supports mm 500 500 500 600 800 800 800 800
Radius of punch tops mm 6,12 6,12 12,16 16,22 16,22 16, 22 16, 22 16, 22
  1. Due to constant R& D specifications & fea
  2. Colour scheme subject to confirm at the t
tures are su me of orde bject to cha
r.
nge without n otice.